Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Micra
    4. : How to remove airbag failure light in Nissan Micra?

Nissan Micra - Video tutorial

Model: Nissan Micra K12 - Years 2002-2010
Part: Airbags
Operation: How to remove airbag failure light in Nissan Micra?

In this tutorial we can see how to remove the airbag failure warning light in the Nissan Micra, a very simple and fast operation, to be carried out only after having resolved the problem that caused it to turn on. First of all let's go inside the passenger compartment, then insert the key but leave it in the initial position. We then turn on the instrument panel, keep an eye on the warning light in question and as soon as it disappears, turn off the ignition and then turn it on again. We repeat the exact same operation 5 consecutive times and finally start the engine.


Posted on 7 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Micra 2017-2024 - What should you do if the airbag light is flashing on the Nissan Micra? Read Answer
    • Micra 2017-2024 - What to do in case of a flashing airbag light on the Nissan Micra? Read Answer
    • Micra 2010-2017 - How do you reset the airbag light in the Nissan Micra? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos