Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Airbag Light on the Nissan Micra K12?

Model: Nissan Micra K12 - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010
Part: Warning light – error code

See other generations:
Video tutorial

The airbag warning light on a car's dashboard can be triggered by various factors, including a faulty connection, a broken sensor, or worse, the activation of one or more of these following an accident. Once the cause of the warning has been identified and rectified, to turn off the warning light, you must go to a garage and use diagnostic equipment to clear it, or follow the instructions in this video and do it yourself.

Turn the ignition on and off five times consecutively, with a pause of a few seconds between each time, and nothing else. The procedure is now complete.


Updated on 15 October 2026 by ScegliAuto


Related tutorials

Nissan Micra (2002-2010 / K12) .. In this video tutorial, you will learn how to reset the airbag light on the Nissan Micra K12. The reset operation is very simple; just follow.. …
Nissan Micra (2002-2010 / K12) In this tutorial, you will see how to remove the airbag warning light on the Nissan Micra, a very simple and quick operation to perform only after re…
Nissan Micra (2002-2010 / K12) In this video, we can see how to reset the service light on a Nissan Micra K12: turn on the ignition without starting the engine, then press the righ…

Other guides you may be interested in

    Frequently Asked Questions

    • Micra 2010-2017 - How to find the radio code of Nissan Micra? Read answer
    • Micra 2002-2010 - What is the meaning of the Nissan Micra P / S warning light? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos