Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the cabin air filter in the Nissan Armada?

Model: Nissan Armada Y62 - Years 2017-2024
Part: Cabin air filter

Replacing the cabin filter of the Nissan Armada is a very simple and quick operation, let's see how to proceed in this tutorial. To do this, we will only need a T20 Torx key. First of all, let's go to the passenger seat, then open the glove compartment and unscrew the three screws along the inner upper edge. Then we remove the lower panel, unscrew the additional three screws and extract the entire drawer from the dashboard. At this point, we can open the long rectangular door, replace the filter and reassemble everything following the reverse procedure.

Posted on 24 June 2023 by ScegliAuto

Video tutorial

Related tutorials

How to change the cabin air filter on a Nissan Armada.
How to change the cabin air filter on a Nissan Armada.
Nissan Armada (2017-2024 / Y62) If we need to replace the cabin air filter, the pollen filter on this car model, in the description below we will find all the necessary steps and pr…
How to replace the engine air filter on Nissan Armada ta60
How to replace the engine air filter on Nissan Armada ta60
Nissan Armada (2004-2015 / Ta60) The guide shows you how to replace the Nissan Armada ta60 fuel filter. The first step is to open the bonnet and secure the vehicle. At this point, fr…
How to replace the cabin filter in a Nissan Armada
How to replace the cabin filter in a Nissan Armada
Nissan Armada (2004-2015 / Ta60) In this video tutorial, we can see how it is possible to replace the cabin filter in a Nissan Armada, following a few simple steps: the first thing t…

Other guides you may be interested in

How to Reset the TPMS Light on the 2011 Volkswagen Polo

The orange tyre light indicates that one or more tyres have a pressure below the recommended limit. This can easily be resolved by inflating them correctly or replacing them in case of a puncture. After performing these actions, it is necessary to reset the light and the sensor to obtain new reading data. All you need to do is start the ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point, the reset is complete, and you can turn off the ignition.

Watch the video!


by ScegliAuto

More videos