Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Cabin Air Filter on a Nissan Armada

Model: Nissan Armada Y62 - Years 2017-2024
Part: Cabin air filter

If you need to replace the cabin air filter, also known as the pollen filter, on this model of vehicle, the following description includes all the necessary steps and procedure for a proper replacement. After sitting in the passenger seat, open the glove compartment and unclip the side support pins to remove it completely. Behind the glove compartment, you will find the compartment containing the filter; to access it, remove the front cover and then extract the filter to replace it with a new one. Finally, close the cover and reattach the glove compartment.

Updated on 21 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Engine Air Filter on the Nissan Armada TA60
How to Replace the Engine Air Filter on the Nissan Armada TA60
Nissan Armada (2004-2015 / Ta60) This guide shows how to replace the fuel filter on the Nissan Armada TA60. The first step is to open the hood and secure the vehicle. At this point, …
How to Replace the Cabin Filter in a Nissan Armada?
How to Replace the Cabin Filter in a Nissan Armada?
Nissan Armada (2017-2024 / Y62) Replacing the cabin filter in a Nissan Armada is a simple and quick task. Here's how to proceed in this tutorial. You will only need a T20 Torx wrenc…
How to Replace the Cabin Filter in a Nissan Armada
How to Replace the Cabin Filter in a Nissan Armada
Nissan Armada (2004-2015 / Ta60) In this video tutorial, you will see how to replace the cabin filter in a Nissan Armada by following some simple steps: the first thing to do is purc…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos