Do it yourself
| ||||
|
Nissan Qashqai - Video tutorial
Model: Nissan Qashqai
J11
- Years 2014-2022 The permanent deactivation of the Start&Stop on the Nissan Qashqai is done by removing the covers located on the left side of the dashboard, next to the steering wheel. Once these panels have been removed, it will be possible to locate the Start&Stop module and the corresponding fuse. The fuse must be extracted and the Start&Stop module must be disconnected from the corresponding power cables. By doing this, it will be possible to reassemble the previously removed dashboard panels to verify that the system has been deactivated.
Posted on 2 August 2023 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the TPMS light of the Volkswagen Polo 2011The orange tire light indicates the presence of one or more tires with an inflation pressure below the recommended limit. All this is easily solved by inflating them correctly or replacing them in the event of a puncture. After carrying out these operations it is necessary to reset the warning light and therefore also the sensor in order to have new reading data. All you have to do is start the car ignition and then fully open the glove compartment on the passenger side. Locate the two buttons in the right corner and press "Set". At this point the reset is complete and you can turn off the ignition. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.014
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |