Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the High-Pressure Fuel Pump on the Nissan Juke

Model: Nissan Juke MK 1 - Years 2010-2019
Part: Fuel pump

This guide will illustrate the steps to remove and replace the high-pressure fuel pump on the Nissan Juke. First, open the bonnet of the vehicle and disconnect the fuel inlet and outlet pipes from the high-pressure pump; use shielding to protect yourself from any fuel spills that may still be under pressure. At this point, undo the fastening screws of the fuel pump, removing it and replacing it with the new original part; install it correctly, reconnecting the pipes!

Updated on 13 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Empty the Fuel Tank of the Nissan Juke?
How to Empty the Fuel Tank of the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) To empty the fuel tank of the Nissan Juke, open the bonnet to access the components inside the engine bay. At the bottom left of the engine block, lo…
How to replace the fuel filter on a 2016 Nissan Juke
How to replace the fuel filter on a 2016 Nissan Juke
Nissan Juke (2010-2019 / MK 1) Replacing the fuel filter on a 2016 Nissan Juke is a fairly complex operation because in order to replace the filter, you also need to replace the pu…
How do you open the fuel tank cap door in the Nissan Juke?
How do you open the fuel tank cap door in the Nissan Juke?
Nissan Juke (2010-2019 / MK 1) Refueling your car, in our case the Nissan Juke, requires knowing how to access the fuel tank cap. The vehicle in question requires lifting the lever…

Other guides you may be interested in

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos