Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Speakers in a Nissan Rogue?

Model: Nissan Rogue T32 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020
Part: Speaker

See other generations:
Video tutorial

To replace the speakers in a Nissan Rogue, pry off the trim around the internal door handle with an object. Remove all the screws underneath, including the one located in the center of the armrest.

This will allow you to detach the door panel to access the underlying components: the speaker can be removed from its location by loosening the screws that hold it in place and disconnecting the power cables. At this point, you can insert the new replacement part and cover everything back with the panel.


Updated on 19 August 2026 by ScegliAuto


Related tutorials

How to Replace and Install Front Speakers in the Nissan Rogue - Qashqai
How to Replace and Install Front Speakers in the Nissan Rogue - Qashqai
Nissan Rogue (2014-2020 / T32) Today's guide will show you how to remove and replace the front speakers in the Nissan Rogue, as well as the Qashqai. First, open the front door and …
How to Replace the Windshield Wiper Blades on a Nissan Rogue?
How to Replace the Windshield Wiper Blades on a Nissan Rogue?
Nissan Rogue (2014-2020 / T32) To replace the windshield wiper blades on a Nissan Rogue, position them vertically so they do not touch the windshield. Then, remove the clip that co…
How to Replace the Front Brake Pads on a Nissan Rogue?
How to Replace the Front Brake Pads on a Nissan Rogue?
Nissan Rogue (2008-2015 / S35) To replace the front brake pads on a Nissan Rogue, lift the vehicle so that the corresponding wheel is not in contact with the ground. This will allo…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos