Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Almera
    4. : Cabin air filter replacement

Nissan Almera - Video tutorial

Model: Nissan Almera N16, MK 2 - Years 2000-2008
Part: Cabin air filter
Operation: Cabin air filter replacement

The passenger compartment air filter of the car model in question is located on the passenger side, behind the glove compartment: in order to access the air conveyor and therefore the filter housing, the door of the glove compartment must be opened, extracted the pegs. limit switches on the bottom and overturn it completely; at this point it is possible to press on the side tabs that fix the cover of the passenger compartment air filter housing and remove it in order to extract the old filter, eliminate any residual dirt and insert the new one (we recommend the activated carbon one) orienting it according to the direction of the air flow.


Posted on 7 September 2023 by ScegliAuto



How to replace the cabin air filter in Nissan Almera?
Nissan Almera (2000-2008 / N16, MK 2) The cabin air filter in the Nissan Almera is located on the driver's side. More precisely, we can identify it in the part adjacent to the pedals. To
How to change the air filter on a Nissan Almera.
Nissan Almera (2000-2008 / N16, MK 2) If we need to replace the engine air filter on this car, below we will find all the steps and necessary information for the replacement and we can al
Air flow meter replacement
Nissan Almera (2000-2008 / N16, MK 2) If you have problems starting the engine and its rpm is irregular, with performance significantly below average, it is likely that the problem lies i

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos