Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Nissan
    3. :
  3. Note
    4. : To reset the maintenance light on a Nissan Note.

Nissan Note - Video tutorial

Model: Nissan Note E11, MK 1 - Years 2004-2013
Part: Checks and maintenance
Operation: To reset the maintenance light on a Nissan Note.

Today let's see how to reset the maintenance light on a first-generation Nissan Note, a model produced from 2004 to 2013. The procedure is very simple and we can do it on our own in just a few seconds after changing the engine oil in the vehicle. Let's see how to proceed right away. First, turn the key to the first position to turn on the vehicle's instrument panel, but without starting the engine. Then, immediately press and hold the right button "TRIP" on the speedometer for about 10 seconds. After doing this, press "TRIP" again to set the mileage interval for the next maintenance, and finally, wait for the screen to exit to complete the reset.


Posted on 27 September 2023 by ScegliAuto

    Frequently Asked Questions

    • Note 2012-2022 - Why did the Start&Stop light come on in the Nissan Note? Read Answer
    • Note 2012-2022 - What does the flashing Start&Stop light on the Nissan Note indicate? Read Answer
    • Note 2012-2022 - What to do if the rear hatch of the Nissan Note does not open? Read Answer
    • Note 2012-2022 - How to find the radio code for Nissan Note? Read Answer
    • Note 2012-2022 - Why is the tailgate on my Nissan Note stuck? Read Answer
    • Note 2012-2022 - What does the P / S light on the Nissan Note mean? Read Answer
    • Note 2004-2013 - Why is the tailgate of the Nissan Note locked? Read Answer
    • Note 2004-2013 - Where is the Nissan Note passenger compartment fan fuse located? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos