Do it yourself
Frequently asked questions about cars and motorcycles

Reset the Engine Oil Change Light on the Nissan Frontier

Model: Nissan Frontier D40 - Years 1997-2021
Part: Service warning light

This guide will show you how to reset the maintenance light for the engine oil change on the Nissan Frontier. First, get in the vehicle and turn on the ignition; then press the accelerator pedal every three seconds for five times, as shown in the video. After that, wait about seven seconds and press the accelerator pedal again for another ten seconds; you will see the light start to blink until it turns off completely, then turn off the ignition and start the engine!

Updated on 14 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Nissan Frontier (1997-2021 / D40) In this guide, we will see the instructions that will allow us to disassemble and replace the oil pressure sensor of the Nissan Frontier with a V6 en…
Nissan Frontier (2021-2026 / D41) Today we will list the steps to follow to independently reset the oil light on a Nissan vehicle. The steps to reset the oil light on the 2022 Nissan …
Nissan Frontier (2021-2026 / D41) To replace the battery inside the key of your Nissan Frontier, simply follow the procedure below carefully and follow all the steps described. First,…

Other guides you may be interested in

Fuses Location and Diagram for the Volkswagen Crafter

In this guide, we will look at the location of the fuse boxes and how to find their diagram for the Volkswagen Crafter. First, get inside the vehicle and start by removing the plastic cover found under the steering wheel, to access the internal fuse box; you will find another fuse box in the engine compartment by removing the plastic cover located next to the battery. At this point, use the owner's manual to find the fuse diagram, which will allow you to identify and replace any blown fuses with new ones!

Watch the video!


by ScegliAuto

More videos