Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Adjust the Fog Lights on the Nissan Qashqai

Model: Nissan Qashqai J11 - Years: 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Part: Fog lights

See other generations:
Video tutorial

Adjusting the height of the fog lights on the Nissan Qashqai model J11 is a very simple and quick task that you can do independently. All you need is a Phillips screwdriver about 15cm long.

First, turn on the vehicle lights and project them onto a flat, monochrome surface, such as a wall. Move to the lower part of the vehicle and insert the screwdriver into the hole, tightening or loosening the screw inside to lower or raise the light.

Use the same procedure for the left light. Once finished, you can turn off the vehicle lights.


Updated on 22 September 2026 by ScegliAuto


Related tutorials

Removing Fog Light Bulbs on a Nissan Qashqai
Removing Fog Light Bulbs on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) Have the fog light bulbs blown? Here’s how to replace them on a Nissan Qashqai. To remove the bulbs, you need to take off the wheel arch liner above …
How to Replace the Fog Light Bulbs on a Nissan Qashqai?
How to Replace the Fog Light Bulbs on a Nissan Qashqai?
Nissan Qashqai (2014-2022 / J11) To replace the fog light bulbs on a Nissan Qashqai, loosen the screws located at the bottom of the bumper on the side corresponding to the bulb to be…
Replacing the Front Fog Light Bulbs on a Nissan Qashqai
Replacing the Front Fog Light Bulbs on a Nissan Qashqai
Nissan Qashqai (2006-2014 / J10) In this video, you will learn how to replace the front fog light bulbs on a Nissan Qashqai. First, locate the bulbs: to do this, turn the wheels to o…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos