Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Vauxhall Meriva -

Vauxhall Meriva (2010-2017 / mk 2, meriva b)

Vauxhall Meriva (2010-2017 / MK 2, Merivab)
How to Reset the Tyre Pressure Warning Light on the Vauxhall Meriva B?
The electronic sensors installed on the tyres of the Vauxhall Meriva B, as with any other car, serve to alert the driver by illuminating the aforementioned …Read all…
Posted on 26 July 2026 by ScegliAuto
Vauxhall Meriva (2010-2017 / MK 2, Merivab)
How to Reset the Tyre Pressure Light on an Opel Meriva B?
The tyre pressure light only comes on when the inflation pressure is not correct, too low compared to the value recommended by the manufacturer and shown on …Read all…
Posted on 20 July 2026 by ScegliAuto
Vauxhall Meriva (2010-2017 / MK 2, Merivab)
How to Reset the Tyre Pressure Light on Opel Meriva?
To ensure the tyre pressure light on the Opel Meriva goes out, you need to inflate the tyres until they reach the optimal pressure value: this value is …Read all…
Posted on 8 April 2026 by ScegliAuto
Vauxhall Meriva (2010-2017 / MK 2, Merivab)
How to reset the TPMS light on the Opel Meriva
Today we will explain the steps to independently reset the tire pressure warning light on an Opel Meriva model B. Turn off the vehicle and engage the parking …Read all…
Posted on 16 October 2025 by ScegliAuto
Vauxhall Meriva (2010-2017 / MK 2, Merivab)
How is the tire pressure warning light reset in the Opel Meriva done?
The car mentioned above, for clarity, is the one shown and reviewed in the video available here, and it is this car that we will delve into the topic of tires. …Read all…
Posted on 6 July 2025 by ScegliAuto
Vauxhall Meriva (2010-2017 / MK 2, Merivab)
How do you reset the tire pressure warning light on the Opel Meriva?
To reset the tire pressure warning light on the Opel Meriva, you will need to inflate the tires until they reach the recommended pressure value, which is …Read all…
Posted on 23 March 2025 by ScegliAuto
Vauxhall Meriva (2010-2017 / MK 2, Merivab)
How to Reset the Tyre Pressure Learning on the Opel Meriva
In today's video, you will see how to reset and re-learn the tyre pressure sensors on the Opel Meriva, following these simple steps. First, obtain your tyre …Read all…
Posted on 9 July 2026 by ScegliAuto
Airbag (3) Alternator (6) Shocks (1) Antenna (2) Air conditioning (2) Car stereo (7) Battery (3) Spark plugs (5) Glow plugs (1) Body (1) Control unit (1) Key (21) Timing belt (10) V-belt (6) Onboard computer (5) Checks and maintenance (20) Dashboard (4) Shifter boot (3) Brake rotors (1) Headlight (8) Tail light (3) Fog lights (2) Air filter (9) Cabin air filter (17) Fuel filter (2) Diesel fuel filter (6) Oil filter (1) Parking brake (3) Clutch (4) Side marker bulb (2) Headlight bulb (21) Tail light bulb (7) License plate light (4) Handle (3) Engine (1) Power window motor (1) Starter motor (4) Transmission fluid (1) Engine oil (2) Clock (4) Door trim panel (12) Front bumper (5) Rear bumper (2) Brake pads (10) Hydraulic pistons (2) Shift knob (4) Pump (5) Fuel pump (3) Push button (4) Instrument cluster (3) Radiator (2) Fuse box (42) Seat (2) Crankshaft position sensor (1) Engine coolant temperature sensor (1) Parking sensors (1) Door lock (3) Oxygen sensor (1) Side mirror (10) Warning light – error code (29) (7) Tire pressure warning light (2) Service warning light (53) Fuel cap (1) Windshield wipers (2) Thermostat (2) Valve (1) EGR valve (2) Side window (1) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos