Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the Service warning light on the Opel Combo?

Model: Vauxhall Combo MK 3, Combo C - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Service warning light

See other generations:
Video tutorial

To reset the Service warning light on the instrument cluster of the Opel Combo, press and hold the button located on the right side of the instrument cluster while it is off: continue holding the button and insert the ignition key into the corresponding lock.

Doing this will turn on the instrument cluster, and you will notice that the Service light starts to flash: keep holding the button until the light disappears completely.

At the end of the procedure, you can release the button and turn off the instrument cluster.


Updated on 24 October 2026 by ScegliAuto


Related tutorials

How to Reset the Service Light on the Opel Combo?
How to Reset the Service Light on the Opel Combo?
Vauxhall Combo (2001-2011 / MK 3, Combo C) To reset the Service light on the Opel Combo, press and hold the button located on the right side of the instrument panel while it is off. Continue h…
How to Reset the "Service" Light on an Opel Combo
How to Reset the "Service" Light on an Opel Combo
Vauxhall Combo (2001-2011 / MK 3, Combo C) Before starting, sit in the driver's seat of your Opel Combo. Begin by pressing and holding the "A" button. After about 3 seconds, press the brake pe…
How to reset the Service light on the Opel Combo?
How to reset the Service light on the Opel Combo?
Vauxhall Combo (2012-2018 / MK 4, Combo D) To reset the Service light on the Opel Combo, sit inside the cabin and press the accelerator pedal all the way down. While holding it down, turn the …

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos