Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Opel Vivaro?

Model: Vauxhall Vivaro MK 1 - Years 2001-2014
Part: Service warning light

The Service light that appears on the instrument panel of the Opel Vivaro can be reset by holding down the accelerator pedal and at the same time turning the ignition key to position two to turn on the instrument panel. At this point, you will need to press the brake pedal three times in a row, then turn the key counterclockwise to turn off the instrument panel. In this way, it will be possible to verify that by turning the key clockwise again and turning on the instrument panel, the Service light will have been correctly removed from the panel.

Posted on 26 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Opel Vivaro
How to Reset the Service Light on the Opel Vivaro
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) Today, you will learn how to reset the service light on the Opel Vivaro independently and for free, without using a diagnostic computer. To reset the…
How to reset the service light on the Opel Vivaro
How to reset the service light on the Opel Vivaro
Vauxhall Vivaro (2014-2019 / MK 2) Resetting the service light of an Opel vehicle is a very simple and quick operation that is carried out after performing the car service. The service…
Reset the service warning of the Opel Vivaro.
Reset the service warning of the Opel Vivaro.
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) In a few steps, we will see the procedure that will allow us to reset the service maintenance light for the oil change on the Opel Vivaro. First, we …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos