Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Astra
    4. : How to remove the brake disc pads Opel Astra

Vauxhall Astra - Video tutorial

Model: Vauxhall Astra Astra H - Years 2004-2010
Part: Brake pads
Operation: How to remove the brake disc pads Opel Astra

How to remove the rear brake disc pads of an Opel Astra. We place our car on a column bridge, we lift to a comfortable height to intervene. Unscrew the pins with a telescopic wrench or compressed air drill and remove the rim, then we begin to unscrew the brake caliper pins by detaching it from the support. With a screwdriver we detach the brake pads, mount the new brake pads with all the pins attached, tighten the caliper support to the disc, then, mount the brake caliper, remembering to tighten all the pins well. Finally we assemble the circle with the pins.


Posted on 15 October 2023 by ScegliAuto



How to fit Opel Astra brake pads
Vauxhall Astra (2009-2016 / Astra J) How to replace the brake pads of the Opel Astra? Let's see the disassembly of the brake parts. We disassemble the wheel to access the brake disc, uns
Replacement front discs and pads Opel Astra
Vauxhall Astra (2004-2010 / Astra H) In this video we will see how to remove the discs and brake pads of the Opel Astra. First of all we remove the wheel by unscrewing the bolts and we g
Replacement of brake pads on Opel Astra j
Vauxhall Astra (2009-2016 / Astra J) To get to the replacement of the front brake pads you must first remove the affected wheel by unscrewing the bolts and lifting the car with a jack. S

How to reset the oil service in the Fiat Toro?

In this tutorial we can see how to reset the oil service in the Fiat Toro. Before carrying out this simple and quick operation, make sure that you have completed any required maintenance work. We start by inserting the key but leaving it in the initial position, after which we keep the accelerator pedal fully depressed and at the same time turn on the instrument panel. At this point, always keeping the accelerator pressed, press the brake pedal 5 consecutive times and, with the pedals in position, turn off the ignition. We check that the procedure has been successful by starting the vehicle.

Watch the video!


by ScegliAuto

More videos