Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to disassemble the inner panel of the rear tailgate of the Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Door trim panel

These short and simple steps will show us how to disassemble and replace the inner panel of the rear tailgate of the Opel Corsa. First, we open the rear tailgate and start unscrewing the fixing screws found inside the handle, using a torx key or screwdriver; then we pry the sides of the panel to detach and remove it, as shown in the video. At this point, it will be possible to access the rear wiper motor or the tailgate lock; apply the same steps in reverse for reassembly of the panel!

Posted on 29 January 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the boot lid on an Opel Corsa?
How to replace the boot lid on an Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) In this tutorial, see how to replace the boot lid on an Opel Corsa, a straightforward and quick operation. First, open the boot, then detach the cove…
How to remove the rear lights on the Opel Corsa?
How to remove the rear lights on the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) In this tutorial we can see how to remove the rear lights in the Opel Corsa, an extremely simple and quick operation. First of all, make sure that th…
How to manually open the trunk hatch of the Opel Corsa.
How to manually open the trunk hatch of the Opel Corsa.
Vauxhall Corsa (2019-2026 / Corsa F) Below we will see the instructions that will allow us to manually open the rear hatch of the Opel Corsa in case of an emergency. First, let's open th…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos