Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear lights on the Opel Corsa?

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Tail light

See other generations:
Video tutorial

In this tutorial we can see how to remove the rear lights in the Opel Corsa, an extremely simple and quick operation. First of all, make sure that the key is not inserted, so that you can operate safely, then open the trunk door and remove the inner cover located on the back of the headlight in question.

Next, unscrew the two plastic nuts indicated, disconnect the power connector, and, pulling it towards us, separate the headlight from the bodywork. At this point, all that remains is to position the replacement and reassemble everything following the reverse procedure.


Posted on 20 February 2025 by ScegliAuto


Related tutorials

How to replace the rear lights in the Opel Corsa?
How to replace the rear lights in the Opel Corsa?
Vauxhall Corsa (2014-2019 / Corsa E) In this tutorial, we can see how to replace the rear lights in the Opel Corsa, an extremely simple and quick operation. First of all, make sure that …
How to replace the rear lights in the Opel Corsa?
How to replace the rear lights in the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) In this tutorial, you will see how to replace the rear lights in the Opel Corsa, a very simple and quick operation. First, ensure that the key is not…
Replacing the Rear Light of the Opel Corsa
Replacing the Rear Light of the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) Below are the instructions that will allow you to disassemble and replace the rear light and its bulbs on the Opel Corsa in simple steps. First, open…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos