Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the tailgate panel in the Opel Meriva?

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Door trim panel

In this tutorial we can see how to disassemble the rear tailgate panel in the Opel Meriva, an extremely simple and quick operation. First of all, we open the tailgate itself, then we identify all the indicated screws and unscrew them using a simple screwdriver with a cross tip. We then remove the small caps placed along the covers of the side pillars, unscrew the additional screws and detach the covers from the frame. At this point, we can grab the panel, pull it forcefully outwards and separate it from the tailgate. To install the replacement, simply follow the reverse procedure.

Posted on 16 May 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Switch on an Opel Meriva
How to Replace the Switch on an Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) How to replace the switch located in the tailgate of an Opel Meriva? In this video, see how to disassemble it. Open and lift the tailgate of your car…
Replacing Wiper Blades on Opel Meriva
Replacing Wiper Blades on Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) How do you remove the wiper blades from an Opel Meriva? Begin by grasping the front wiper blade with your hands, disengage the retaining plastic, gen…
How to Reset the Maintenance Light on the Opel Meriva B
How to Reset the Maintenance Light on the Opel Meriva B
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) This video shows the procedure to reset the maintenance light/code 82 on the Opel Meriva. To perform this procedure, simply turn on the ignition with…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos