Do it yourself
Frequently asked questions about cars and motorcycles

How to replace the front brake discs on Opel Zafira B

Model: Vauxhall Zafira MK 2, A05, Zafira B - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Brake rotors

See other generations:
Video tutorial

In this video, we see how to change the front brake discs on an Opel Zafira B: first, we open the brake fluid reservoir cap, remove the front wheels, and lift the vehicle; we unscrew the brake caliper attachment and separate the brake pads, putting aside the caliper retention springs; we remove the brake pads and make sure the oil delivery pipe is securely hung, we clean the entire area with a wire brush and WD-40. We unscrew the caliper attachment and remove the bracket, then unscrew the disc attachment; we clean the hub well and treat the surface with copper grease.

We apply the new disc, clean the caliper support before reinstalling; then we put back the brake caliper and the pads, then the dust caps and the retention spring.

We clean the disc surface with a specific cleaner, and the hub with copper grease. We wait a few minutes and then reassemble the wheels and lower the vehicle.

We close the oil reservoir cap. Operation completed.


Posted on 8 June 2025 by ScegliAuto


Related tutorials

Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) Resetting the service light on the 2011 Opel Zafira is a simple task performed after each service. First, press and hold the button located below the…
Vauxhall Zafira (2005-2011 / MK 2, A05, Zafira B) The Opel Zafira, produced from 2005 to 2011, has two fuse boxes and an OBD port. The first fuse box is located inside the cabin, specifically under t…
Vauxhall Zafira (1999-2005 / Zafira A, T98, MK 1) Good morning, today’s goal is to discover where to find and how to reach the OBD socket of your Opel Zafira. The OBD socket is located beneath the ha…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos