Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on an Opel Combo

Model: Vauxhall Combo Combo E, MK 5 - Years 2019-2026
Part: Service warning light

Let's see how to reset the service light on an Opel Combo: this procedure refers to models with an analog instrument panel and a tachometer with an LCD display similar to the one in the video. Sit inside the vehicle and do not turn anything on: the instrument panel must be completely off. Press and hold the "reset" button on the tachometer. While holding down the button, turn on the instrument panel, without starting the engine. After a few seconds, the symbol of an English key and a screwdriver will appear on the display, along with a countdown. Continue to hold down until the countdown ends and disappears. Once the countdown reaches zero and the light disappears, you can release the reset button.

Posted on 23 October 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Opel Combo?
How to Reset the Service Light on the Opel Combo?
Vauxhall Combo (2001-2011 / Combo C, MK 3) To reset the Service light on the Opel Combo, press and hold the button located on the right side of the instrument panel while it is off. Continue h…
How do you reset the service light on the Opel Combo 2007?
How do you reset the service light on the Opel Combo 2007?
Vauxhall Combo (2001-2011 / Combo C, MK 3) Let's see how to reset the service light in the Opel Combo, referring to the video here. The aforementioned light activates when the vehicle reaches …
Service light reset on an Opel Combo.
Service light reset on an Opel Combo.
Vauxhall Combo (2001-2011 / Combo C, MK 3) .. In this very short video guide today we can see how to reset the service light on an Opel Combo, mk3 model produced from 2001 to 2011. Let's start the.. …

Other guides you may be interested in

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos