Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil warning light on the Opel Movano.

Model: Vauxhall Movano MK 3 - Years 2021-2026
Part: Service warning light

Let's see how to reset the oil change light on an Opel Movano (and the procedure is identical for the twin vehicles Peugeot Boxer and Citroen Jumper). The procedure is very simple and is performed entirely using the pedals, without the need for tools. We engage the handbrake, press the accelerator pedal and the brake pedal all the way down, and turn on the instrument panel. We wait for 10 to 15 seconds: during this time, the oil service light on the instrument panel should turn off. Once it has turned off, we release both pedals and turn off the electrical system. We turn it back on and check the panel to ensure that the service light is off.

Posted on 23 November 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the AdBlue warning light on the Opel Movano?
How do you reset the AdBlue warning light on the Opel Movano?
Vauxhall Movano (2021-2026 / MK 3) The AdBlue warning light reset that appears on the instrument panel of the Opel Movano will need to be performed by topping up the necessary amount o…
How do you reset the AdBlue warning light on the Opel Movano?
How do you reset the AdBlue warning light on the Opel Movano?
Vauxhall Movano (2021-2026 / MK 3) The AdBlue warning light that is shown on the instrument panel of the Opel Movano can be reset by performing a top-up, by adding the necessary amount…
How to Reset the Service Light on a 2015 Opel Movano
How to Reset the Service Light on a 2015 Opel Movano
Vauxhall Movano (2010-2021 / MK 2, Movano B) The Opel Movano is the goods transport vehicle shown in the attached tutorial video, where the engine oil has been changed along with the oil and air…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos