Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD port of the Opel Mokka B 2021 located?

Model: Vauxhall Mokka Mokka B - Years 2020-2026
Part: Checks and maintenance

To independently locate the OBD port of your Opel Mokka B (year 2021), you should rely on the procedure described in this new guide addressed to you. First, enter the cabin and then open the glove compartment located in front of the front passenger seat and remove the small side plastic cover. After completing these simple steps, you will finally have free access to the OBD port you were looking for, and you can then connect any diagnostic tool compatible with your Opel Mokka B to it.

Posted on 9 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to locate the OBD port of the Opel Mokka B
How to locate the OBD port of the Opel Mokka B
Vauxhall Mokka (2020-2026 / Mokka B) If you own an Opel Mokka B and want to find out where the OBD port is located, all you have to do is carefully read the following steps and put them …
Where is the OBD port of the Opel Mokka located?
Where is the OBD port of the Opel Mokka located?
Vauxhall Mokka (2012-2019 / Mokka A) If you don't know how to easily locate the OBD port inside the cabin of your Opel Mokka A, don't worry because below you will find the description of…
Where is the OBD port located in the Opel Mokka?
Where is the OBD port located in the Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) The diagnostic socket or OBD socket on an Opel Mokka vehicle produced from 2012 to 2019 is located inside the passenger compartment. Specifically, th…

Other guides you may be interested in

    Frequently Asked Questions

    • Mokka 2012-2019 - What do the codes 82 and 89 of the Opel Mokka mean? Read answer

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos