Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on an Opel Corsa

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Tail light

Want to replace the rear light on an Opel Corsa but don't know how? Here's how to do it: open the tailgate and use a screwdriver to unscrew (with a socket or screwdriver with a bit) the fastening pins located at the side of the rear light. Once the light is free from any constraints, detach it from the bodywork (disconnect the relevant power connectors). Replace any damaged bulbs with identical size and voltage pieces. Finally, reassemble the light and proceed in reverse order for installation. Test the correct functioning of the lights. -Socket with sockets -Plastic lever -Screwdriver.

Updated on 8 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Headlight on an Opel Corsa
How to Remove the Headlight on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Remove the rear headlight on an Opel Corsa? Remove the rear headlight with all its components. Open the boot, then remove the cover cap located at th…
How to Remove the Rear Light on Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) How do you remove the rear light from an Opel Corsa? Lift the boot to access the plastic covers in the luggage compartment. Remove the cover from the…
How to Remove the Rear Light of an Opel Astra
How to Remove the Rear Light of an Opel Astra
Vauxhall Corsa (2014-2019 / Corsa E) Follow this guide to remove the rear light of an Opel Astra along with the bulbs. Open the boot lid, unscrew the plastic securing nuts at the back of…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos