Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Fuse Layout for the Opel Astra J

Model: Vauxhall Astra Astra J - Years 2009-2016
Part: Fuse box

Knowing the exact layout of the fuses in your vehicle allows you to address certain electrical malfunctions without necessarily going to a garage. A new fuse costs only a few pounds, and replacing it yourself saves on the mechanic's labour costs (and the petrol to get to the garage). In this video, you can see how the fuses are arranged and what they are for in the Opel Astra J, which are contained in two different fuse boxes: one in the engine compartment and one in the boot.

Posted on 14 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Fuse arrangement on the Opel Astra H
Fuse arrangement on the Opel Astra H
Vauxhall Astra (2004-2010 / Astra H) The Opel Astra H was produced and marketed between 2004 and 2010 before being replaced by new models created by the manufacturer. However, this vehic…
Placement of the Opel Astra fuse box
Placement of the Opel Astra fuse box
Vauxhall Astra (1998-2006 / Astra G) Trying to fix a malfunction of a component of the Opel Astra's electrical system, it will be useful to know the location of the fuse box in order to …
Arrangement of the fuse box of the Opel Astra J
Arrangement of the fuse box of the Opel Astra J
Vauxhall Astra (2009-2016 / Astra J) In this video we see where the fuse boxes are located in the Opel Astra J: We find the fuse box of the passenger compartment in the lower part of the…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos