Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Trip Meter on the Opel Frontera?

Model: Vauxhall Frontera MK 2, Frontera B - Years 1998-2003
Part: Instrument cluster

The vehicle shown in this video is a 2001 Opel Frontera, and now we will see how to reset the trip meter. This operation is usually performed when you are unsure of the vehicle's fuel consumption, so you can check how much fuel has been used over a certain distance, or to measure the mileage from a starting point to a specific destination. To perform the requested operation, press and hold the Trip button on the instrument panel while simultaneously turning on the ignition; you will notice that the trip mileage will be reset immediately.

Posted on 16 February 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the Opel Frontera diesel filter?
How do you replace the Opel Frontera diesel filter?
Vauxhall Frontera (1998-2003 / MK 2, Frontera B) The Opel Frontera diesel filter is positioned in the lower part of the vehicle: in order to access it, it will therefore be necessary to remove the p…
How do I replace the fuel pump on the Opel Frontera?
How do I replace the fuel pump on the Opel Frontera?
Vauxhall Frontera (1998-2003 / MK 2, Frontera B) In order to replace the fuel pump of the Opel Frontera you have to go to the underside of the vehicle, so that you can loosen the bolts that secure t…
Where is the control unit located in the Opel Frontera?
Where is the control unit located in the Opel Frontera?
Vauxhall Frontera (1998-2003 / MK 2, Frontera B) In this video, we can see where the control unit is located in the Opel Frontera and how to proceed in case we need to replace it. As shown, it is lo…

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos