Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Location of the AdBlue Module on the Opel/Vauxhall Movano

Model: Vauxhall Movano MK 3 - Years: 2021, 2022, 2023, 2024, 2025, 2026
Part: Checks and maintenance

See other generations:
Video tutorial

In this video, we will locate the AdBlue module on an Opel/Vauxhall Movano (and Renault Master). In left-hand drive vehicles, the AdBlue module is positioned on the passenger side (right) near the engine bay, while in right-hand drive vehicles (as shown in the video), it is still on the passenger side (but on the left).

The AdBlue module is located high under the bonnet. The video shows the position of the electrical connector for replacement of the tank or reprogramming of the ECU, or for removal of the DPF (in this case, we should disconnect the connector to avoid errors or excessive smoke).

Commonly, we may need to replace the AdBlue tank, which requires disconnecting the connector and emptying the tank.


Posted on 11 March 2026 by ScegliAuto


Related tutorials

How to Reset the AdBlue in the Opel Movano
How to Reset the AdBlue in the Opel Movano
Vauxhall Movano (2021-2026 / MK 3) To reset the AdBlue system in the Opel Movano, follow these steps: Ensure that the AdBlue level in the tank is adequate. If the level is low, fill it…
How to Reset the AdBlue Warning Light on the Opel Movano?
How to Reset the AdBlue Warning Light on the Opel Movano?
Vauxhall Movano (2021-2026 / MK 3) The AdBlue warning light displayed on the instrument panel of the Opel Movano can be reset by topping up the necessary amount of additive liquid in t…
How to Reset the AdBlue Warning Light on the Opel Movano?
How to Reset the AdBlue Warning Light on the Opel Movano?
Vauxhall Movano (2021-2026 / MK 3) To reset the AdBlue warning light on the Opel Movano, you need to top up the tank by adding the necessary amount of additive liquid: to do this, open…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos