Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Perform an Oil Service on the Opel Adam?

Model: Vauxhall Adam MK 1 - Years 2013-2019
Part: Engine oil

The oil service is the most basic type of service and involves a simple oil and oil filter change, without replacing other filters or the timing belt as done in a full service. In this case, after lifting the engine cover, unscrew the oil filter and replace both the cartridge and the seal before refitting it in place. Next, move under the car and drain the used oil through the designated hole in the oil sump, and complete the oil service by adding 4 litres of new engine oil through the appropriate filler neck.

Posted on 27 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on an Opel Adam
How to Reset the Service Light on an Opel Adam
Vauxhall Adam (2013-2019 / MK 1) Let's see the procedure to reset the service light for the routine maintenance oil change on an Opel Adam. First, get in the vehicle and turn on the …
How to reset the oil service light in the Opel Adam?
How to reset the oil service light in the Opel Adam?
Vauxhall Adam (2013-2019 / MK 1) In this tutorial, you will see how to reset the oil service light in the Opel Adam, a very simple and quick operation that should only be done after …
How to Reset the Service Light on the Opel Adam?
How to Reset the Service Light on the Opel Adam?
Vauxhall Adam (2013-2019 / MK 1) This tutorial shows how to reset the service light on the Opel Adam, an extremely simple and quick operation to perform only after completing all req…

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos