Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to check the oil on an Opel Adam

Model: Vauxhall Adam MK 1 - Years: 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Engine oil

Video tutorial

In this video, we will see how to check the engine oil on an Opel Adam: first, we need to make sure we are on level ground, and then the engine must be off for at least five minutes. We open the hood and pull out the yellow ring located at the base of the engine block, to which the oil dipstick is attached.

We clean the dipstick with a paper towel and then put it back in place. We pull it out again and check that the level is between the "min" and "max" marks.

Ideally, it should be close to the latter, but never exceed it. If the level is near the minimum, we add oil of the quality specified in the owner's manual, checking the level again after topping it up.


Posted on 26 December 2025 by ScegliAuto


Related tutorials

How to reset the oil service light in the Opel Adam?
How to reset the oil service light in the Opel Adam?
Vauxhall Adam (2013-2019 / MK 1) In this tutorial, you will see how to reset the oil service light in the Opel Adam, a very simple and quick operation that should only be done after …
How to Reset the Engine Oil Light on an Opel Adam
How to Reset the Engine Oil Light on an Opel Adam
Vauxhall Adam (2013-2019 / MK 1) To reset the engine oil light on an Opel Adam, turn on the ignition without starting the engine. Use the buttons on the steering wheel or the control…
Oil Reset on Opel Adam
Oil Reset on Opel Adam
Vauxhall Adam (2013-2019 / MK 1) See how to reset the engine oil light on an Opel Adam after changing the lubricant. While seated in the driver's seat, select the "Menu Information" …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos