Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to deactivate Start & Stop on the Opel Mokka?

Model: Vauxhall Mokka Mokka A - Years: 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Part: Checks and maintenance

See other generations:
Video tutorial

In this tutorial, you will see how to deactivate Start & Stop on the Opel Mokka, a very simple and quick operation to perform if you find it too intrusive. First, enter the cabin, then insert the key and start the vehicle.

Next, locate the button depicting a circled "A" on the central console, press it, and check that the corresponding notification has appeared on the display. The deactivation of the system is not permanent and will need to be performed at each vehicle start.


Posted on 12 September 2026 by ScegliAuto


Related tutorials

How to Disable Start & Stop on the 2017 Opel Mokka?
How to Disable Start & Stop on the 2017 Opel Mokka?
Vauxhall Mokka (2012-2019 / Mokka A) The start & stop system is a mechanism that reduces both fuel consumption and emissions, which activates automatically when the vehicle makes a brief…
How to Change the Driving Mode in an Opel Mokka A
How to Change the Driving Mode in an Opel Mokka A
Vauxhall Mokka (2012-2019 / Mokka A) Let's see how to change the driving mode on the Opel Mokka A: it is a very simple procedure. Look at the centre of the dashboard, near the tunnel. Th…
How to deactivate the passenger airbag of the Opel Mokka
How to deactivate the passenger airbag of the Opel Mokka
Vauxhall Mokka (2012-2019 / Mokka A) Today we will explain how to deactivate the passenger airbag of the Opel Mokka produced from 2016 to today. To perform this simple operation, we need…

    Frequently Asked Questions

    • Mokka 2012-2019 - What to do if the trunk of your Opel/Vauxhall Mokka won't open? Read answer
    • Mokka 2012-2019 - What do the codes 82 and 89 of the Opel Mokka mean? Read answer

How to Reset the Tyre Pressure Warning Light on the Jeep Renegade?

To reset the tyre pressure warning light on the Jeep Renegade, inflate the tyres until they reach the recommended pressure: this value is indicated on the sticker attached to the driver’s door pillar. Once the tyres are properly inflated, navigate through the menu that appears on the instrument cluster until you find the tyre pressure option. At this point, press and hold the OK button on the right side of the steering wheel to make the warning light disappear.

Watch the video!


by ScegliAuto

More videos