Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing Headlight and Bulb on Opel Corsa

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Headlight bulb

You will now remove the front headlight bulb on the Opel Corsa. To do this, remove the splash guard located under the engine, secured with screws that you will unscrew. Now, from the engine bay, unscrew the screws of the metal plate holding the headlight: remove part of the bumper to access the headlight. Unscrew the upper screw holding the headlight and the screw located in the plastic bracket: disconnect the connector and remove the headlight. To remove the bulb, simply unclip the tab and extract the bulb.

Updated on 17 March 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Headlamp Bulb on the Opel Corsa E?
How to Replace the Headlamp Bulb on the Opel Corsa E?
Vauxhall Corsa (2014-2019 / Corsa E) To replace the bulb on the Opel Corsa E, open the bonnet to access the internal part of the headlamp corresponding to the bulb to be replaced. Once t…
How to Replace the Front Headlamp Bulb on the Opel Corsa D
How to Replace the Front Headlamp Bulb on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) To replace the front headlamp bulb on the Opel Corsa D, open the bonnet and remove the air filter box. Disconnect it from the relevant hose and take …
Replacing the Front Headlight Bulb on the Opel Corsa D
Replacing the Front Headlight Bulb on the Opel Corsa D
Vauxhall Corsa (2006-2014 / Corsa D) In this video tutorial, learn how to remove and replace the front headlight bulb on the Opel Corsa D by following the instructions below. First, open…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos