Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Car Radio for Multifunction Remote Installation

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Key

See other generations:
Video tutorial

Using a plastic tool to avoid damaging the bodywork, pry at the base of the tunnel around the gear lever to release the plastic clips and move it to access the screws securing the radio console. Remove the complete console and disconnect the necessary electrical connectors to install the kit. Prepare the two cables included with the remote kit following the attached instructions, which need to be inserted into the original connectors, with the other end connected to the kit's control unit.

The control unit should be connected in series to the power cable at the input. According to the instructions attached to the kit, secure the remote inside the tunnel by removing the plastic cover on the passenger side.

Refit the cover, passing the cables through the radio tunnel. Refit the radio by reversing the previous steps.


Updated on 5 February 2026 by ScegliAuto


Related tutorials

How to Replace the Key Fob Battery of an Opel Insignia
How to Replace the Key Fob Battery of an Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) How to replace the key fob battery of an Opel Insignia? This video details the process. Take your key fob and press the button to release the metal k…
How to Replace the Key Fob Battery on the Opel Insignia
How to Replace the Key Fob Battery on the Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) This video tutorial will show you how to disassemble and replace the battery in the key fob of the Opel Insignia, in simple and quick steps. First, t…
How to Replace the Remote Battery of the Opel Insignia?
How to Replace the Remote Battery of the Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) To replace the battery of the Opel Insignia remote, press the button at the top of the device to lift the key. Once lifted, pry inside its housing to…

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos