Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Vauxhall
  4. :
  5. Corsa
  6. : Spark plug replacement instructions

Vauxhall Corsa - Video tutorial

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Spark plugs
Operation: Spark plug replacement instructions

Open the front hood and remove the plastic cover bearing the word ECOTEC; then unscrew the two torx screws that fix the ignition coil block, disconnect the side socket and apply a support bar fixing it to the pin seats just removed in order to release and remove the pipette block. At this point, unscrew the original spark plugs and replace them with the new ones without exceeding the tightening torque. Then reapply the pipette pack by tightening the relative fixing screws and reconnecting the side power socket. Finally reposition the cap and start the engine to check correct assembly.


Posted on 11 July 2023 by ScegliAuto



How to replace the spark plugs in the Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Here is a general guide on how to replace the spark plugs in an Opel Corsa. However, please note that the specific steps may vary depending on the ex
Spark plug replacement instructions
Vauxhall Corsa (1993-2000 / Corsa B) We recommend that you first carry out this maintenance operation with the engine cold to avoid unpleasant burns. Then proceed with the removal of the
Spark plug replacement instructions
Vauxhall Corsa (1993-2000 / Corsa B) The efficiency of the spark plugs in a petrol-powered engine is absolutely fundamental as they generate the detonation of the fuel which then gives p

Other guides that may interest you

    Frequently Asked Questions

    • Corsa 2006-2014 - How to solve the problem with the oxidized coils of the Opel Corsa 2010? Read Answer
    • Corsa 2014-2019 - Coil problem on the Opel Corsa what does it depend on? Read Answer
    • Corsa 1993-2000 - Where are the spark plugs of the Opel Corsa B? Read Answer
    • Corsa 1993-2000 - How many spark plugs does the '99 Opel Corsa B have? Read Answer

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos