Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Speedometer on Opel Vivaro

Model: Vauxhall Vivaro MK 1 - Years: 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012
Part: Instrument cluster

See other generations:
Video tutorial

Learn how to remove the instrument cluster from the Opel Vivaro. Enter the vehicle and remove the battery cover located under the floor: disconnect the terminals.

Remove the plastic trim covering the instrument cluster. Unscrew the securing screws of the instrument cluster.

After removing the screws, pull the unit from the dashboard and disconnect the power cable located at the back of the instrument cluster. Install a new unit or reassemble the same one (replace the LEDs/bulbs in the cluster).

Finally, reverse the assembly steps. Test the operation of the instrument cluster.


Updated on 3 April 2026 by ScegliAuto


Related tutorials

How to Change the Unit of Measurement from km/h to mph (and vice versa) on Opel/Vauxhall Vivaro
How to Change the Unit of Measurement from km/h to mph (and vice versa) on Opel/Vauxhall Vivaro
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) In this video, we see an Opel/Vauxhall Vivaro with right-hand drive that had the speedometer in km/h, while in the United Kingdom, distance measureme…
How to Reset the Odometer of the Opel Vivaro B
How to Reset the Odometer of the Opel Vivaro B
Vauxhall Vivaro (2014-2019 / MK 2) To manually reset the total distance travelled (Trip A) displayed on the instrument cluster of your Opel Vivaro B (2014-2019), follow these steps. Fi…
How to Remove the Clutch Pump from an Opel Vivaro
How to Remove the Clutch Pump from an Opel Vivaro
Vauxhall Vivaro (2001-2014 / MK 1) Before starting, enter the cabin of your Opel Vivaro. Begin by removing the cover located between the clutch pedal and the pump. Next, disconnect the…

Other guides you may be interested in

How to Set the Clock on a Renault Master 3

This guide shows you how to set a new time on a Renault Master 3. Start by turning on the instrument cluster of the vehicle without starting the engine. Next, using the end of the right-hand steering column stalk, scroll through the options on the display until you reach 'set time', then press the down arrow button to make the displayed time blink. Once this is done, press and hold the down arrow button to change the hour, which you can adjust using the two arrow buttons at the end of the stalk. Once the correct hour is set, press and hold the down arrow button again to move to the minutes. After setting the correct time, restart the vehicle.

Watch the video!


by ScegliAuto

More videos