Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change Oil on an Opel Corsa D

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Engine oil

Do you want to service your Opel Corsa? Let’s look at the oil and filter replacement. Lift the front bonnet of the car and secure it, then locate the oil filter. Unscrew the filter housing located in the engine bay. Raise the car on a column lift or jack, unscrew the bolt of the oil sump with a socket spanner (after removing the plastic protective panel), allow the fluid to drain into a disposal container and refit the sump bolt. After removing the oil from the engine, fit the new filter and fill the sump with new engine oil.

Updated on 17 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on the Opel Corsa?
How to Change the Engine Oil on the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) To change the engine oil on the Opel Corsa, access the underside of the engine bay and locate the drain plug for the oil sump. By unscrewing this plu…
How to Change the Oil and Oil Filter on Opel Corsa?
How to Change the Oil and Oil Filter on Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) To change the engine oil on the Opel Corsa D, it is recommended to lift the car and remove the Torx 45 screw that secures the oil drain plug. Once th…
How to Reset the Oil Warning Light on an Opel Corsa
How to Reset the Oil Warning Light on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Resetting the oil change light on your Opel Corsa is really very simple: first, however, you must have actually changed the oil in your vehicle! Turn…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos