Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Vectra
    4. : How to remove the instrument panel

Vauxhall Vectra - Video tutorial

Model: Vauxhall Vectra Vectra C, MK 3 - Years 2002-2008
Part: Dashboard
Operation: How to remove the instrument panel

This video explains how to proceed to remove the instrument panel of an Opel Vectra. It is necessary to identify the two screws located just behind the steering wheel: they are covered by two small caps that will be lifted with the tip of a slotted screwdriver. Unscrew the screws and be careful not to damage the plastic. Lift and remove the plastic cover placed between the steering wheel and the instrument panel. Also remove the cover located above the small ventilation grids and the one under the air adjustment knobs. You will now have access to the clips that allow you to remove the column cover. Now, with a T10 bit, you will have to unscrew the two torx screws that block the control panel: remove it slowly, remembering that first you will have to disconnect the electrical connections.


Posted on 22 July 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Vectra 2002-2008 - Why is the dashboard of the Opel Vectra not working? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos