|
Do it yourself
| |||
| ||||
Water Pump Replacement Instructions
Model: Vauxhall Corsa
Corsa C
- Years:
2000, 2001, 2002, 2003, 2004, 2005, 2006
Video tutorial
First, it is recommended to carry out this maintenance with the engine cold; the pump is connected to the side of the engine block and to replace it, you must first remove the engine support (therefore, place a jack under the engine for support) and then the drive pulley of the pump itself, which is driven by the auxiliary belt that must be removed by loosening the relevant tensioner (to loosen the fixing bolts of the pulley, block its rotation using a screwdriver if necessary). Then remove the hoses connected to the pump, disconnect the connectors of the relevant sensors, and proceed to unscrew the fixing bolts of the pump itself to the engine block. Remove the sensor from the old pump to apply it to the new one, which must be installed with a new gasket. Once the pump is securely fixed, apply gasket sealant to the flange of the thermostat housing and restore the coolant level.
Updated on 9 February 2026 by ScegliAuto
Related tutorials
Vauxhall Corsa
(2006-2014 /
Corsa D)
Today's guide will show you the main steps to remove and replace the water pump on the Opel Corsa 1.2. First, open the bonnet and begin by removing t…
Vauxhall Corsa
(2000-2006 /
Corsa C)
Today's main steps will show you the procedure for removing and replacing the water pump on the Opel Corsa 1.4. First, open the bonnet and start by r…
Vauxhall Corsa
(2000-2006 /
Corsa C)
In this video tutorial, learn how to remove and replace the water pump on an Opel Corsa C. First, open and lift the bonnet; to remove the water pump,…
Other guides you may be interested in
|
How to lower the rear seats in the Peugeot 206?
In this tutorial, you will see how to lower the rear seats in the Peugeot 206, a very simple and quick operation, for example, if you need more space in the boot. First, open both the doors and the tailgate, then unclip the seat base and position it vertically. Next, remove the horizontal partition, locate the release levers at the ends of both seatbacks, and, by operating them, lower the seatbacks. To reassemble everything, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.086
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |