Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the water pump of the Opel Corsa 1.4

Model: Vauxhall Corsa Corsa C - Years 2000-2006
Part: Pump

Today's main steps will show us the process of disassembling and replacing the water pump of the Opel Corsa 1.4. First of all, we open the car's engine hood and start disassembling and removing the air filter box, disconnecting the intake hose and unscrewing the screws; then we loosen the tensioner to remove the alternator belt, as shown in the video. At this point, we disconnect the coolant hose from the water pump, letting the fluid drain; then we unscrew the water pump screws to remove it and replace it with the new one, finally topping up the fluid!

Posted on 22 August 2024 by ScegliAuto

Video tutorial

Related tutorials

Replacement of the water pump on an Opel Corsa
Replacement of the water pump on an Opel Corsa
Vauxhall Corsa (2006-2014 / Corsa D) Today we will see how to replace the water pump on an Opel Corsa D 1.2 16v. Let's start the operation by removing the air filter box and disconnectin…
How to replace the water pump of the Opel Corsa 1.4 16V
How to replace the water pump of the Opel Corsa 1.4 16V
Vauxhall Corsa (2014-2019 / Corsa E) In this guide we will see the main instructions that will allow us to disassemble and replace the water pump of the Opel Corsa 1.4 16V. First, lift t…
How to replace the water pump of the Opel Corsa 1.2
How to replace the water pump of the Opel Corsa 1.2
Vauxhall Corsa (2006-2014 / Corsa D) Today's main steps will show us the process of disassembling and replacing the water pump of the Opel Corsa 1.2. First, we open the hood of the car a…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos