Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Water Pump on the Opel Corsa 1.2

Model: Vauxhall Corsa Corsa D - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014
Part: Pump

See other generations:
Video tutorial

Today's guide will show you the main steps to remove and replace the water pump on the Opel Corsa 1.2. First, open the bonnet and begin by removing the air filter box, disconnecting the intake hose; then disconnect the coolant pipe, allowing it to drain into a container, as shown in the video.

Next, remove the engine mount and disconnect the serpentine belt, subsequently removing the timing belt; unscrew the bolts of the water pump to remove it and replace it with the new one!


Updated on 14 September 2026 by ScegliAuto


Related tutorials

Replacing the Water Pump on Opel Corsa
Replacing the Water Pump on Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Replace the water pump on the Opel Corsa. Remove the pump from inside the engine bay. Lift the front bonnet of the car to access the pump. Disconnect…
How to Replace the Water Pump on the Opel Corsa 1.2
How to Replace the Water Pump on the Opel Corsa 1.2
Vauxhall Corsa (2006-2014 / Corsa D) Today's main steps will show you the process of removing and replacing the water pump on the Opel Corsa 1.2. First, open the bonnet of the vehicle an…
Replacing the Water Pump on an Opel Corsa C
Replacing the Water Pump on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In this video tutorial, learn how to remove and replace the water pump on an Opel Corsa C. First, open and lift the bonnet; to remove the water pump,…

Other guides you may be interested in

How to Reset the Tyre Pressure Warning Light on a Kia Rio?

The tyre pressure warning light displayed on the instrument cluster of the Kia Rio can be reset by inflating the tyres until they reach the recommended pressure value: this value is indicated on the sticker affixed to the driver's door pillar. Once all tyres have been inflated to the recommended pressure, turn on the ignition to check that the light has disappeared: if it is still present, it may be necessary to drive for a few miles, allowing the sensors to work and thus turning off the light.

Watch the video!


by ScegliAuto

More videos