Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Insigna
    4. : How to disassemble the car stereo of an Opel Insignia

Vauxhall Insigna - Video tutorial

Model: Vauxhall Insigna MK 1, Insigna A - Years 2008-2017
Part: Car stereo
Operation: How to disassemble the car stereo of an Opel Insignia

Before we can begin, we will have to sit in the front passenger seat of our Opel Insignia. So let's start by disengaging and removing the sections of the car radio frame, using a thin but strong tool to pry. After that, we will have to disengage and lift the lower section of the car radio. By doing so, we will have reached the screws that secure the radio to the dashboard, which we will have to unscrew and remove. Once this is done, we will have to disconnect the car radio power connectors, then remove the car radio itself, and we will have completed the disassembly.


Posted on 3 April 2024 by ScegliAuto



Radio replacement on an Opel Insignia.
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Thanks to this guide, we can see the entire process necessary to replace the car stereo in a first-generation Opel Insignia (2008-2017). This is a si
Where is the OBD port located on the 2011 Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) When you notice anomalies in the control unit of your Opel Insignia A (year 2011), you can try to intervene with a specific diagnostic tool. In order
Where is the fuel filter located and how to reach it on an Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) Good morning, today we are here to discover where the diesel filter of our Opel Insignia is located and understand how to reach it. The filter is loc

    Frequently Asked Questions

    • Insigna 2008-2017 - Where is the fuse for the car radio located in the Opel Insignia? Read Answer

How to set the clock on the Yamaha Xmax 300

To change the time of the Yamaha Xmax 300, keep the "trip" button pressed, at the same time turn the ignition to "on"; release the "trip" button when the time starts flashing; briefly press the "trip" button to set the time; press and hold for a few seconds to confirm and move on to the minutes; briefly press the same button to set the minutes; we long press the same "trip" button to confirm; at this point in the meantime that we hold down the minutes stop flashing the time has been saved correctly and we can turn off the instrument panel.

Watch the video!


by ScegliAuto

More videos