Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Electric Water Pump for the Wipers on the Opel Corsa D

Model: Vauxhall Corsa Corsa E - Years: 2014, 2015, 2016, 2017, 2018, 2019
Part: Windshield wipers

See other generations:
Video tutorial

To replace the wiper water pump, follow these steps: locate the tank situated at the top of the engine bay on the right side, disconnect the power connector from the water pump, and remove the pump itself. Detach the water supply hose and take the new pump.

The type of pump is identified by a unique code that is the same for various Opel or Vauxhall car models. Therefore, ensure you purchase the specific pump type for your vehicle, then securely reconnect the hose to the pump and reinsert the pump into the tank housing.

Finally, reconnect the power connector.


Updated on 15 May 2026 by ScegliAuto


Related tutorials

How to disassemble the pump and reservoir of the windshield washer fluid of the Opel Corsa
How to disassemble the pump and reservoir of the windshield washer fluid of the Opel Corsa
Vauxhall Corsa (2014-2019 / Corsa E) In this short guide, we will see the instructions that will allow us to disassemble and replace the washer pump and tank of the Opel Corsa. First, we…
Replacing the Water Pump on an Opel Corsa C
Replacing the Water Pump on an Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) In this video tutorial, learn how to remove and replace the water pump on an Opel Corsa C. First, open and lift the bonnet; to remove the water pump,…
Replacing the Water Pump on Opel Corsa
Replacing the Water Pump on Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) Replace the water pump on the Opel Corsa. Remove the pump from inside the engine bay. Lift the front bonnet of the car to access the pump. Disconnect…

Other guides you may be interested in

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos