|
Do it yourself
| |||
| ||||
How to Replace the Radio Screen on the Opel Astra K
Model: Vauxhall Astra
Astra K
- Years:
2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022
Video tutorial
This guide will explain the procedure for replacing the radio screen on the Opel Astra K (from 2015 onwards). It is recommended to perform this procedure with both the engine and ignition completely off. Follow these steps: 1. Remove the plastic supports and the subsequent clip supports on the passenger and driver sides, located near the ignition key insert; 2. Unscrew the 2 screws located on opposite sides of the radio, which are 7mm hex screws; 3. Remove the electronic block of the screen along with its panel, taking care during the removal of the electrical cables; 4. Once the electronic block of the panel is isolated, remove the corresponding screws with a T10 screwdriver and gently pull out the flat cables from the circuit board; 5. Replace the old radio panel with the new part. To install it, align it with the previously removed circuit board, placing the new panel on top, ensuring the flat cables are correctly inserted during the installation of the new panel; 6. Complete the installation of the entire radio block by reversing the previous steps; 7. Check that the radio panel functions correctly by turning the key and activating the ignition.
Updated on 23 May 2026 by ScegliAuto
Related tutorials
Vauxhall Astra
(1998-2006 /
Astra G)
Removing the stereo to replace it in an Opel Astra. Remove the stereo with the removal keys. Insert the keys into the holes on the sides of the stere…
Vauxhall Astra
(1998-2006 /
Astra G)
As you will see in this tutorial, replacing the car radio in an Opel Astra G is an extremely simple operation. To do this, in addition to the replace…
Vauxhall Astra
(1998-2006 /
Astra G)
In this brief guide, we will see the instructions that will allow us to enter the radio code for the Opel Astra, thus unlocking all radio stations. F…
Other guides you may be interested in
|
How to reset the tyre pressure warning light on the Kia Niro EV?
To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.083
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |