Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where to Find the Internal Fuse Box and OBD Port of the Opel Insignia?

Model: Vauxhall Insigna MK 1, Insigna A - Years: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Fuse box

See other generations:
Video tutorial

In this brief and simple guide, find out where to locate the internal fuse box and OBD port of the Opel Insignia by following the instructions below. First, get into the vehicle from the driver's side and locate the OBD port; you will find it low down, beneath the steering wheel, as shown in the video.

The internal fuse box is found by opening the small glove compartment to the left of the steering wheel; once removed, access your internal fuses. The external fuse box is located in the engine bay next to the battery!


Updated on 24 May 2026 by ScegliAuto


Related tutorials

Where is the OBD port of the 2011 Opel Insignia?
Where is the OBD port of the 2011 Opel Insignia?
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) When you encounter issues with the control unit of your 2011 Opel Insignia A, you can attempt to diagnose the problem using a suitable diagnostic too…
Where is the Fuse Box Located in the Opel Insignia?
Where is the Fuse Box Located in the Opel Insignia?
Vauxhall Insigna (2017-2026 / MK 2, Insigna B) Our Opel Insignia model B has two fuse boxes inside. The first fuse box is located inside the cabin, specifically behind the driver’s side glove comp…
Fuse Location and Diagram on Opel Insignia
Fuse Location and Diagram on Opel Insignia
Vauxhall Insigna (2008-2017 / MK 1, Insigna A) The first fuse box on the Opel Insignia is located in the cabin, specifically low and to the left of the steering wheel, under the side air vent. Her…

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos