Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Vauxhall
    3. :
  3. Zafira
    4. : How to replace the fuel filter on Opel Zafira.

Vauxhall Zafira - Video tutorial

Model: Vauxhall Zafira MK 1, Zafira A, T98 - Years 1999-2005
Part: Diesel filter
Operation: How to replace the fuel filter on Opel Zafira.

In this video tutorial we can see how you can replace the fuel filter on your Opel Zafira. The first thing to do is to buy a new diesel filter; next step get into the car, pull the handbrake and pull the bonnet lever; lift the bonnet and secure it with the appropriate rod. Remove the gasket located under the windshield. Remove the upper part of the water baffle. Use the 4w-D spray and with a 10 socket wrench we must unscrew the fasteners of the lower part of the deflector. Once the fasteners have been removed we must remove the lower part of the water deflector; disconnect the fuel pressure sensor connector. With an all-purpose spray cleaner clean the fuel filter housing; using a 30 torx key, unscrew the fixing elements of the filter container cover. Remove the lid from the filter container. Remove the old filter and insert the new filter and reassemble all the parts in reverse order.


Posted on 27 November 2022 by ScegliAuto

    Frequently Asked Questions

    • Zafira 2005-2011 - Where is the fuel filter located in the Opel Zafira? Read Answer
    • Zafira 2005-2011 - Where is the fuel filter on the Opel Zafira Tourer located? Read Answer
    • Zafira 2011-2019 - What is the location of the fuel filter on the Oper Zafira 1 6? Read Answer
    • Zafira 2005-2011 - How to change the fuel filter in the Opel Zafira B? Read Answer
    • Zafira 2005-2011 - Where is the fuel filter located in the Opel Zafira? Read Answer
    • Zafira 2005-2011 - How much does the Opel Zafira B diesel filter cost? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos