Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacement of the Front Driveshaft for the Opel Astra H

Model: Vauxhall Astra Astra H - Years 2004-2010
Part: Axle shaft

This video shows the instructions on how to remove and replace the front driveshaft of the Opel Astra H. First, lift the vehicle and remove the front wheel; then, undo the central bolt of the wheel bearing using a socket spanner. Next, disconnect the driveshaft from the wishbone by undoing the pin bolts; remove the bolts at the base of the front driveshaft to take it out, as shown in the video. Finally, replace it with the new one, using the original part, by following the reverse procedure!

Updated on 6 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the CV joint boot of the Opel Astra H.
How to replace the CV joint boot of the Opel Astra H.
Vauxhall Astra (2004-2010 / Astra H) In this video, we see how to replace the CV boot on an Opel Astra H: we lift the car and remove the wheel. We remove the CV joint nut (if it is rusty…
How to Replace a Driveshaft on an Opel Astra?
How to Replace a Driveshaft on an Opel Astra?
Vauxhall Astra (2004-2010 / Astra H) In this tutorial, you will see how to replace a driveshaft on an Opel Astra, a very straightforward operation. Before proceeding, lift the car at lea…
Instructions for Replacing the Clutch on Opel Astra 2.0 CDTi
Instructions for Replacing the Clutch on Opel Astra 2.0 CDTi
Vauxhall Astra (2009-2016 / Astra J) In this video tutorial, you will find the main instructions to dismantle and replace the clutch on an Opel Astra 2.0 CDTi, third generation. First, l…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos