Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

When and How to Change the Timing Belt on the Opel Meriva

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Timing belt

This guide provides the necessary instructions for removing and replacing the timing belt on the petrol Opel Meriva. The timing belt for this type of engine should be replaced within a range of 43,000 to 75,000 miles, depending on its condition. Open the bonnet and begin by removing the intake hose and the timing cover. Raise the vehicle and remove the front right wheel, taking off the wheel arch liner as shown in the video. Now, remove the auxiliary belt and the crankshaft pulley; take the necessary references for removing the timing belt!

Updated on 25 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Know When to Replace the Timing Chain on an Opel Meriva
How to Know When to Replace the Timing Chain on an Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) In this video, you will learn how to determine when to replace the timing chain on an Opel Meriva. An indicative factor for knowing when the timing c…
How to Replace the Timing Belt on an Opel Meriva 1.7 CDTi?
How to Replace the Timing Belt on an Opel Meriva 1.7 CDTi?
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) To replace the timing belt on the Opel Meriva, lift the car to remove the front wheel and the inner cover of the wheel arch. Next, open the bonnet an…
How to Change the Timing Belt on an Opel Meriva
How to Change the Timing Belt on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) To replace the timing belt on an Opel Meriva, disconnect the negative battery terminal, lift the front of the vehicle, and remove the wheel and the w…

Other guides you may be interested in

    Frequently Asked Questions

    • Meriva 2003-2010 - How much does it cost to replace the timing chain of the Opel Meriva A 1 3? Read answer

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos