Do it yourself
Frequently asked questions about cars and motorcycles

How to Reset the Service Light on the Opel Vivaro

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Warning light – error code

After changing the engine oil and oil filter on this vehicle, you need to reset the service light that has illuminated on the dashboard. To do this, follow these simple instructions. First, access the cabin, press and hold the accelerator pedal fully down, then turn on the ignition. Quickly press the brake pedal three times and finally turn off the ignition. Next, turn the ignition back on to check that the service light has been reset, and you're done.

Updated on 8 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Vauxhall Vivaro (2014-2019 / MK 2) Resetting the service light of an Opel vehicle is a very simple and quick operation that is carried out after performing the car service. The service…
Vauxhall Vivaro (2014-2019 / MK 2) Reset the service light only after completing the servicing operations. To reset the service light on the Opel Vivaro, follow the same steps as for r…
Vauxhall Vivaro (2019-2026 / Vivaro C, MK 3) .. Today, you will learn how to reset the service light on the Opel Vivaro independently and for free, without using a diagnostic.. …

Other guides you may be interested in

    Frequently Asked Questions

    • Vivaro 2014-2019 - Where to find the radio code of the Opel Vivaro? Read answer

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos