Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Rear Light on an Opel Meriva?

Model: Vauxhall Meriva Meriva A, MK 1 - Years 2003-2010
Part: Tail light

In this tutorial, you will see how to remove the rear light on an Opel Meriva, a very simple and quick operation. First, ensure that the key is not in the ignition, then open the boot. Locate the two bolts on the inner edge of the light and, using a simple cross-head screwdriver, unscrew both. Next, grasp the light, pull it towards you, and separate it from the bodywork. At this point, simply disconnect the power connector and proceed with replacing the damaged element.

Updated on 15 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to replace the rear headlight bulbs of the Opel Meriva
How to replace the rear headlight bulbs of the Opel Meriva
Vauxhall Meriva (2010-2017 / MK 2, Meriva B) In this guide we will see the instructions that will allow us to disassemble and replace the bulbs of the rear headlight of the Opel Meriva. First of…
How to replace the rear taillight of the Opel Meriva A
How to replace the rear taillight of the Opel Meriva A
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) In this video we can see how to change the rear light of an Opel Meriva A: we open the rear hatch, and with a screwdriver, we remove the two 8 mm scr…
How to Replace the Indicator Bulb on an Opel Meriva
How to Replace the Indicator Bulb on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) How to replace the indicator bulb on an Opel Meriva? Here’s how to proceed: get a plastic lever or use a screwdriver. Pry the plastic of the indicato…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos