Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the headlight of the Opel Meriva?

Model: Vauxhall Meriva MK 2, Meriva B - Years 2010-2017
Part: Tail light

Here is the procedure for disassembling the tail light of the Opel Meriva. The available video guide explains how to indirectly disassemble it, with the goal in this case being the removal of the rear bumper. By opening the trunk door, you can access the locking pins of the light group through the specially created slot in the lining. Unscrew these pins and from the outside, grab the aforementioned light group and pull it out of the recess where it is located. The last thing to do is to disconnect the rear electrical power supply.

Posted on 22 June 2025 by ScegliAuto

Video tutorial

Related tutorials

Change the Bulb on an Opel Meriva
Change the Bulb on an Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) Want to replace the bulbs on your Opel Meriva? Here’s how to remove the front headlight bulbs. Locate the inspection cover at the back of the headlig…
How to Replace the Front Headlamp on the 2007 Opel Meriva?
How to Replace the Front Headlamp on the 2007 Opel Meriva?
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) By watching the attached video, you can learn how to DIY replace the front headlamp on the 2007 Opel Meriva. Start by removing the lateral, upper, an…
How to Replace the Rear Light Bulb on the Opel Meriva
How to Replace the Rear Light Bulb on the Opel Meriva
Vauxhall Meriva (2003-2010 / Meriva A, MK 1) To replace the rear light bulb on the Opel Meriva, open the tailgate to access the screws securing the light unit. Once these screws are loosened, yo…

Other guides you may be interested in

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos