Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where are the fuses located in the Opel Vivaro?

Model: Vauxhall Vivaro MK 2 - Years 2014-2019
Part: Fuse box

All the fuses of the Opel Vivaro are contained within the only fuse box installed in the vehicle: in this type of vehicle, the fuse box is located in the lower left part of the dashboard, relative to the steering column. It will be possible to access this box by removing the appropriate protective panel: inside, it will be possible to locate the fuses that are responsible for the operation of the air conditioning, low beam headlights, horn, etc. Each fuse is marked with the corresponding amperage.

Posted on 7 April 2023 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses of the Opel Vivaro located?
Where are the fuses of the Opel Vivaro located?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) Each fuse of the Opel Vivaro is contained within the appropriate fuse boxes that are present on the vehicle: in this type of vehicle it is possible t…
Where is the fuse box of the Opel Vivaro B located?
Where is the fuse box of the Opel Vivaro B located?
Vauxhall Vivaro (2014-2019 / MK 2) When you encounter malfunctions in one or more electrical components of your Opel Vivaro B, you can intervene specifically on the respective fuses. I…
Where are the fuses located in the Opel Vivaro?
Vauxhall Vivaro (2019-2026 / MK 3, Vivaro C) On the Opel Vivaro, the fuses are all contained within two fuse boxes that are installed in the vehicle: these are located inside the cabin and insid…

Other guides you may be interested in

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos