Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine oil pressure sensor in the Opel Corsa?

Model: Vauxhall Corsa Corsa D - Years 2006-2014
Part: Checks and maintenance

The engine oil pressure sensor is located in the immediate vicinity of the engine and is easy to reach. We can identify it in front of the radiator and near the dipstick used to check the engine oil level. To remove it, start by disconnecting the electrical connector and then unscrew the sensor with a 24mm wrench, being careful not to discard the gasket. After cleaning any oil residue, the new sensor can be installed and the electrical connector reconnected. We check the engine oil level and top it up if necessary.

Posted on 12 July 2023 by ScegliAuto

Video tutorial

Related tutorials

How to replace the oil pressure sensor of the Opel Corsa
How to replace the oil pressure sensor of the Opel Corsa
Vauxhall Corsa (2000-2006 / Corsa C) To replace the oil pressure sensor of the Opel Corsa, we start by opening the hood, we go to the left side of the upper engine block, at the bottom, …
How to disassemble the oil pressure sensor on the Opel Corsa C
How to disassemble the oil pressure sensor on the Opel Corsa C
Vauxhall Corsa (2000-2006 / Corsa C) Let's find out in this video the instructions on how to disassemble and replace the engine oil pressure sensor of the Opel Corsa C. First of all, we …
How to replace the engine oil pressure sensor in the Opel Corsa?
How to replace the engine oil pressure sensor in the Opel Corsa?
Vauxhall Corsa (2006-2014 / Corsa D) In this tutorial, we can see how to replace the engine oil pressure sensor in the Opel Corsa, an extremely simple and fast operation. First of all, m…

Other guides you may be interested in

    Frequently Asked Questions

    • Corsa 1993-2000 - Where is the engine starter relay located in the Opel Corsa B? Read answer

Installation of Upgraded Intercooler Radiator with Pipes

Lift the vehicle on suitable axle stands, remove the front wheels, and then the front bumper and grille. Proceed to remove the front headlights; drain the coolant, remove the intercooler radiator and the hoses connecting it to the intake system. Position the new intercooler radiator in the grille, temporarily securing it with cable ties, and mark with a marker the part of the metal that needs to be removed to allow the new hoses to pass through. Cut the marked portion of metal and apply a gasket to the edge. Remove the inner cover of the bumper and position it near the radiator to identify any interfering parts to eliminate: again, apply a gasket to the edge of the cut. Create brackets for securing the new radiator and proceed with the installation of the connecting pipes from the radiator to the intake, shaping and connecting them appropriately. Finally, reassemble the bumper, headlights, and grille.

Watch the video!


by ScegliAuto

More videos